Zanussi ZCG43TC0WA Manual del usuario - Página 22
Navegue en línea o descargue pdf Manual del usuario para Cocinas Zanussi ZCG43TC0WA. Zanussi ZCG43TC0WA 24 páginas.
Imprimir página
2. Examine the supply pressure by turning the
Rapid burner and one other burner fully on,
and lighting them. The pressure must be:
a) 20 mbar for Natural Gas
b) 29 mbar for LPG, butane only
c) 37 mbar for LPG, propane only.
3. Turn the taps off and disconnect the
pressure gauge.
4. Make sure that all burners work correctly.
Checking the hob burners
1. Lift the lid.
2. Put on the burner crowns and caps. Make
sure that they are correctly seated.
3. Put on the pan supports.
4. Light one of the hob burners.
To light the hob burner refer to the "Ignition
of the hob burners".
Check if the flame is regular.
Check each of the burners.
5. Turn the knob for the hob to the off position.
Energy efficiency
Product information for hob according to EU 66/2014
Model identification
Type of hob
Number of gas burners
Energy efficiency per gas burner
(EE gas burner)
Energy efficiency for the gas hob (EE gas hob)
EN 30-2-1: Domestic cooking appliances
burning gas - Part 2-1 : Rational use of energy -
General
Hob - Energy saving
You can save energy during everyday cooking if
you follow below hints.
• When you heat up water, use only the
amount you need.
• If it is possible, always put the lids on the
cookware.
22
Checking the oven burners
1. Put in the deep pan and the trivet.
2. Light the oven burner.
To light the oven burner refer to the "Ignition
of the oven burners".
Check if the flame is regular.
3. Turn the knob to the off position.
Electrical installation
This appliance is supplied with a main plug and
a main cable.
ZCG43TC0WA
ZCG43TC0XA
Hob inside Freestanding Cooker
4
Left Front - Rapid
Left rear - Semi Rapid
Right front - Auxiliary
Right rear- Semi Rapid
• Before you use the burners and pan support
make sure they are assembled correctly.
• The cookware bottom should have the
correct diameters for the burner size.
• Put the cookware directly over the burner
and in the centre of it.
• When the liquid starts to boil, turn down the
flame to barely simmer the liquid.
• If it is possible, use a pressure cooker. Refer
to its user manual.
WARNING!
The manufacturer is not responsible
if you do not follow the safety
precautions from Safety chapters.
The spark generator is active all the
time if the phases are not connected
correctly.
52.9 %
54.6 %
not applicable
54.6 %
54.0 %
www.zanussi.com