Zanussi ZCG62386 Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Cocinas Zanussi ZCG62386. Zanussi ZCG62386 28 páginas.

Imprimir página
What to do if...
Problem
There is no spark when you try to
activate the spark generator.
There is no spark when you try to
activate the spark generator.
There is no spark when you try to
activate the spark generator.
The flame extinguishes immedi-
ately after ignition.
The flame ring is uneven.
The burners do not work.
The appliance makes noises.
The flame colour is orange or yel-
low.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
The oven does not heat up.
The oven does not heat up.
The turnspit does not rotate.
It takes too long to cook the
dishes or they cook too quickly.
www.zanussi.com
Possible cause
The hob is not connected to an
electrical supply or it is connec-
ted incorrectly.
The fuse is released.
Burner cap and crown are placed
incorrectly.
Thermocouple is not heated up
sufficiently.
Burner crown is blocked with
food residues.
There is no gas supply.
The oven is deactivated.
The lamp is defective.
You left the dish in the oven for
too long.
The clock is not set.
The necessary settings are not
set.
The turnspit is not correctly in-
stalled into the turnspit hole.
The temperature is too low or too
high.
Remedy
Check if the hob is correctly con-
nected to the electrical supply.
Refer to the connection diagram.
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Place the burner cap and crown
correctly.
After lightning the flame, keep the
spark generator activated for
equal or less than 10 seconds
Make sure that the injector is not
blocked and the burner crown is
clean.
Check the gas connection.
Some metal parts of the appli-
ance expand and contract when
they heat up or cool down. The
noises are normal.
The flame can look orange or yel-
low in some areas of the burner.
This is normal.
Activate the oven.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Set the clock.
Make sure that the settings are
correct.
Refer to "Using the turnspit".
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
19