Directed Directechs DB3 Manual de instalación - Página 4

Pre-installation and application warnings

This section highlights important information for this specific firmware and will assist in pricing accordingly, as

START

HERE

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

T-Harness is not compatible.

compatible

Vehicle Takeover

Firmware notes

IMPORTANT:

This firmware does not include functionality to disarm the vehicle's OEM alarm system. The OEM Alarm Inhibit option

is set by default when flashing your module. To ensure vehicle security, we strongly recommend the installation of a hybrid system that

combines a remote starter and alarm.

Remote Start Ready (RSR):

•RSR installations are not compatible with vehicles equipped with a manual transmission.

•RSR is a function that enables the interface module to remote start the vehicle completely on its own.

Consequently, there is no need for an aftermarket or an OEM remote starter in order to start the vehicle from a distance.

SmartStart compatible: SmartStart is equipped with D2D, which means it can be connected to an interface module and used in

Remote Start Ready (RSR) mode without the use of a remote starter. See "Module programming" for more information.

Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

Refer to the "Vehicle connections" following the installation diagram.

Conditions and Limitations

Remote Start: All doors must be closed and locked to remote start the vehicle.

Power Windows Data feature: Depending on the vehicle's trim level, the Power Windows Data feature may not be supported

during remote start runtime.

Takeover: OEM Remotes or Smart Handles must be used to unlock the vehicle for proper vehicle takeover.

Note: Please ensure that you print and provide the client with the "Quick Reference Guide (QRG)". The QRG contains vital

information and instructions pertaining to this matter.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if

not supported in data.

IMPORTANT: In vehicles not equipped with a Factory Hood Pin, you must permanently ground the vehicle's N.C. OEM Hood Pin

input for successful operation. See the 'Vehicle Connections' section for hood pin location.

[2] Power liftgate: This connection is only required if vehicle is equipped with a power liftgate.

403.TL17 1.02 2022 Toyota Corolla Cross (Smart Key)

Refer to the Quick Reference Guide section for more details.

Keys required for

Keys required

programming

for operation