Zanussi ZCV664FPB Manual del usuario - Página 21
Navegue en línea o descargue pdf Manual del usuario para Cocinas Zanussi ZCV664FPB. Zanussi ZCV664FPB 28 páginas.
Imprimir página
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display shows "12.00".
The display shows F11.
Steam and condensation settle
on the food and in the cavity of
the oven.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
WARNING!
Refer to Safety chapters.
Technical data
Dimensions
Height
Width
Depth
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
www.zanussi.com
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The lamp is defective.
There was a power cut.
The plug of the core temperature
sensor is not correctly installed
into the socket.
You left the dish in the oven for
too long.
We recommend that you write the data here:
894 - 912 mm
600 mm
600 mm
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Replace the lamp.
Reset the clock.
Put the plug of the core tempera-
ture sensor as far as possible in-
to the socket.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
21