Zanussi ZCV69360XA Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Cocinas Zanussi ZCV69360XA. Zanussi ZCV69360XA 33 páginas.
También para Zanussi ZCV69360XA: Manual del usuario (32 páginas)

Imprimir página

ACCESSORIES

•

Wire shelf

For cookware, cake tins, roasts.

•

Grill- / Roasting pan

To bake and roast or as pan to collect fat.

•

AirFry tray

To fry food with less oil or without baking paper.

BEFORE FIRST USE

WARNING! Refer to Safety chapters.

INITIAL CLEANING

Remove all accessories and removable shelf

supports from the oven.

Refer to "Care and cleaning" chapter.

Clean the oven and the accessories before the first

use.

Put the accessories and the removable shelf

supports back to their initial position.

SETTING THE TIME

You must set the time before you operate the oven.

Only the top oven works without the

set time.

The

flashes when you connect the appliance to

the electrical supply, when there was a power cut

or when the timer is not set.

Press the

to set the correct time.

After approximately five seconds, the flashing stops

and the display shows the time of day you set.

CHANGING THE TIME

You cannot change the time of day if

the Duration

operates.

HOB - DAILY USE

WARNING! Refer to Safety chapters.

or End

function

•

Trivet

For roasting and grilling.

Use the trivet only with the Grill- /

roasting pan.

Press

again and again until the indicator for the

Time of Day function flashes.

To set a new time, refer to "Setting the time".

PREHEATING

Preheat the empty oven before first use.

Preheat the two ovens before first use.

Heat up one oven at a time.

Set the functions listed below, if

applicable.

1. Set the function

250ºC.

2. Let the oven operate for 1 hour.

3. Set the function

250ºC.

4. Let the oven operate for 15 minutes.

5. Turn off the oven and let it cool down.

Accessories can become hotter than usual. The

oven can emit an odour and smoke. Make sure that

the airflow in the room is sufficient.

HEAT SETTING

Symbols

Off position

1 - 6

Heat settings

. Set the temperature to

Function