Zanussi ZKT6050 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Cocinas Zanussi ZKT6050. Zanussi ZKT6050 40 páginas. Zanussi cooker user manual
También para Zanussi ZKT6050: Características y funciones (9 páginas)

Imprimir página

1. Controls and Their Functions

Before using the appliance

Rating plate

• This is situated on the lower front frame of

the appliance and can be seen upon opening

the door. Alternatively the rating plate may

also be found on the back or top of some

models (where applicable).

• The appliance must be protected by a

suitably rated fuse or circuit breaker.

• The rating of the appliance is given on the

rating plate.

• Do not remove the rating plate from the

appliance as this may invalidate the

guarantee.

Preparing to use your appliance

• Wipe over the base of the oven(s) with a soft

cloth using hot soapy water. Wash the

furniture before use.

• We suggest that you run the oven(s) and grill

for 10 – 15 minutes at maximum

temperature, to burn off any residue from

their surfaces. Accessible parts may become

hotter than in normal use. Children should be

kept away. During this period an odour may

be emitted, it is therefore advisable to open a

window for ventilation.

The cooling fan for the controls

• The cooling fan comes on immediately when

the grill/top oven is switched on and after a

short time when the main oven is in use. It

may run on after the controls are switched

off until the appliance has cooled.

• During the initial period the cooling fan may

turn on and off, this is quite normal.

WARNING!

Always allow the cooling fan to cool the

appliance down before switching off at the

wall prior to carrying out any cleaning or

maintenance work.

Touch control sensors

• This appliance is operated using touch

control sensors. Functions are controlled by

touching sensor fields and confirmed by

displays and acoustic signals. Touch the

sensor fields from above, without covering

other sensor fields.

Switching the hob on/off

• The hob must be switched on before setting

any cooking function or programme. When

the on/off touch sensor

held, the hotplate settings will show in the

electronic display.

• To switch off the hob, you can press and

hold the on/off touch sensor

Any cooking functions or programme will

stop.

• After switching on, within approximately 10

seconds a heat setting or function must be

set, otherwise the appliance automatically

switches itself off.

is pressed and

at any time.