Directed Viper 220 MAX Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Sistema de seguridad Directed Viper 220 MAX. Directed Viper 220 MAX 18 páginas. Recreational vehicle security system

Imprimir página

Primary Harness (H1), 12-pins connector wiring description

H1/1 ORANGE Ground-when-armed output (-) 500 mA

This wire supplies a (-) 500 mA ground as long as the system is armed. This output ceases as soon as the system is dis-

armed. The orange wire is pre-wired to control the Directed Electronics 8618 Starter Kill relay included.

From Orange H 1/1 (-)

Ground-when-armed output

H1/2 WHITE (+) Brake lamp output

As shipped, this wire should be connected to the (+) brake lamp wire. This wire will flash the brake light once

when armed and twice when disarmed. It also flashes the brake lamp when security system is triggered. A diode

must be inserted inline with the factory brake lamp wire.

IMPORTANT! : You must use non-conductive grease on each of the connectors of the

security system to avoid premature deterioration of the pins and connectors. Failure

to do so could cause oxidation and prevent the security system from functioning cor-

rectly thus voiding the product warranty.