Directed Directechs DB3 Manual de instalación - Página 17

Imprimir página

Directed Directechs DB3 Manual de instalación

Feature and option list

It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing

page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the

information on this page.

* Default option

Feat.

Operation

Flashes / Option

1. No RF Output* Module is connected to a remote starter using a standard installation.

RFTD Output

2. RFTD Output

Type

3. SmartStart

Unlock Driver

1. Driver priority*

Priority

2. All

1. Disabled*

Heated Seats

2. Enabled

Heated

1. 32 °F (0 °C)*

Seats/Defroster

Temperature

2. 23 °F (-5 °C)

Control

3. 41 °F (5 °C)

4. Always ON

1. High*

Heated Seats

Temperature

2. Low

Level

Smart OEM

1. Disabled

Alarm Control

2. Safelock

3. Enabled*

403.HONDA9 1.12 2014 Acura RLX (Smart Key)

Description

Module is connected to an XL202 using an RSR or RXT installation (when available).

Module is connected to SmartStart using an RSR or RXT installation (when available).

Unlocks only the driver door when the button is first pressed, and unlocks all doors

when it is pressed a second time within 5 seconds.

Unlocks all doors when the button is first pressed.

No operation.

When the feature is enabled, it will activate the Heated Seats and heated steering

wheel.

When Heated Seats or Defroster feature is enabled, it will activate the feature upon

remote start when temperature is below 32 °F (0 °C).

When Heated Seats or Defroster feature is enabled, it will activate the feature upon

remote start when temperature is below 23 °F (-5 °C).

When Heated Seats or Defroster feature is enabled, it will activate the feature upon

remote start when temperature is below 41 °F (5 °C).

When Heated Seats or Defroster feature is enabled, it will activate the feature at

any temperature.

When Heated Seats are activated, they will be set to HIGH.

When Heated Seats are activated, they will be set to LOW.

The OEM alarm will not be controlled by the interface upon remote start. No disarm

or arm command will be executed at the beginning or end of the sequence; it must

be controlled by the Remote Starter.

Smart OEM Alarm Control will behave like a standard Safelock feature on a remote

starter. It will unlock at the beginning of the sequence, and relock after start and

shutdown.

Smart OEM Alarm Control will synchronize with the OEM alarm so that it will

disarm and rearm the vehicle in the remote start sequence, only when required.

Smart OEM Alarm Control will monitor the alarm and door lock status to detect if

the disarm or rearm is required. If the vehicle is unlocked or is not equipped with

factory alarm, the disarm/rearm will not be executed.