Directed Directechs DB3 Manual de instalación - Página 8

Imprimir página

Directed Directechs DB3 Manual de instalación

Vehicle connections

The connection information listed below is specific to the 2023 Kia Carnival (Smart Key). Refer to "Pre-installation and application warnings" for a list of important notes.

Data 14-pin blue connector (H1)

Module

Conn./Pin

Color

H1/1

Light Green

H1/2

Violet/Yellow

H1/3

Tan/Black

H1/4

Tan

H1/5

Orange/Green

H1/6

Orange/Brown

H1/7

Brown

H1/8

Yellow

H1/9

Orange/Yellow

H1/10

Orange/Red

H1/11

Yellow/Red

H1/12

Brown/Red

H1/13

Red

H1/14

Black

Output 12-pin red connector (H2)

Module

Conn./Pin

Color

H2/1

Black/White

H2/2

Green/Black

H2/3

Green/White

H2/4

Red/Black

H2/5

Violet/White

H2/6

Gray

H2/7

Gray/Black

H2/8

Violet/Green

H2/9

Violet/Brown

403.KIA10 1.10 2023 Kia Carnival (Smart Key)

Description

Single Wire CAN

J1850

[3]

(Data) HS CAN High 1

[3]

(Data) HS CAN Low 1

(Data) HS CAN High 2

(Data) HS CAN Low 2

Relay 1 N.O. - No Connection

Relay 1 COM. - Immo. Data Interr. (conn. side)

Relay 1 N.C. - Immo. Data Interr. (vehicle side)

Relay 2 N.C. - No Connection

Relay 2 COM. - (+) Ignition Output

Relay 2 N.O. - (+) 12 Volt Input

(+) 12 Volt Input

(-) Ground

Description

No Connection

[2]

(-) PTS 1 Output

No Connection

[2]

(-) PTS 2 Output

No Connection

(+) Starter Output

(+) Accessory Output

No Connection

(MUX) Parking Light Output

Connects To

Wire Location

No Connection

ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 21

Connection only required when installing a SmartStart with telematics

features.

ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 22

Connection only required when installing a SmartStart with telematics

features.

ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 7

ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (H), pin 23

No Connection

Driver Kick, white 55 pin plug (EM11), pin 16

No Connection

ICU Junction Block-Dash Fuse Box, black 6 pin plug (B), pin 2

ICU Junction Block-Dash Fuse Box, black 6 pin plug (B), pin 6

Connects To

Wire Location

No Connection

Start Stop Button Switch, white 10 pin plug, pin 1

Connecting the PTS wires will result in a "Get it and Go" takeover procedure

for the client. If not connected, the client needs to push the PTS button for

Takeover and Pit Stop mode.

No Connection

Start Stop Button Switch, white 10 pin plug, pin 7

Connecting the PTS wires will result in a "Get it and Go" takeover procedure

for the client. If not connected, the client needs to push the PTS button for

Takeover and Pit Stop mode.

No Connection

Driver Kick, white 55 pin plug (EM11), pin 11

Driver Kick, white 55 pin plug (EM11), pin 21

No Connection

Headlight-Wiper Switch, white 16 pin plug, pin 10

(+/-)

Wire Color

Data

Gray/Orange (D-CAN)

Data

Brown/Orange (D-CAN)

Data

Red (B-CAN)

Data

Blue (B-CAN)

Data

White/Black

Data

White/Black

Black

Red (50A)

(chassis ground)

(+/-)

Wire Color

Yellow/Orange

Orange/Black

Pink

Yellow

MUX

Blue/Orange