Blackberry RADAR-M ITA100-1 Manual de instalación - Página 24
Navegue en línea o descargue pdf Manual de instalación para Radar Blackberry RADAR-M ITA100-1. Blackberry RADAR-M ITA100-1 39 páginas. Container, dry van, insulated trailers barn doors
También para Blackberry RADAR-M ITA100-1: Manual de instalación (27 páginas), Manual de instalación (36 páginas)
Imprimir página
24
BLACKBERRY RADAR ITA100-1 CHASSIS BRACKET INSTALLATION GUIDE
19. Place the chassis bracket assembly on the mounting surface, aligning the holes on
the bracket with the hole on the asset. Place the washer on the fastener, then insert
the fastener into the hole on the bracket and the hole in the asset. Use the fasteners
to attach the chassis bracket assembly to the asset.
Note: Depending on your asset's construction you may wish to use the
following fastener types to complete the installation.
Self-Tapping Screws—best for mounting onto boxed sections
Nuts and Bolts—best for mounting on surfaces with open cross-sections
Tip: To help make installation easier, you may install the fasteners according to the
sequence indicated on the template. This installation sequence will best support the
weight of the bracket assembly, while you are installing the other fasteners.
20. Installation is now complete.