Clarke 3400404 Manual de instrucciones de uso y mantenimiento - Página 9

Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Sander Clarke 3400404. Clarke 3400404 18 páginas. 225mm long reach drywall sander (230v)

Imprimir página

PREPARATION AND USE

FITTING A SANDING PAD

1. Ensure the sander is switched off

and the plug is removed from the

socket.

2. Remove the sanding disc.

3. Place the allen key in the

hexagon hole in the centre of the

sanding pad and rotate

clockwise to remove pad

4. Place replacement sanding pad and tighten allen key anticlockwise.

FITTING SANDING DISC

1. Ensure the sander is switched off

and the plug is removed from the

socket.

2. Select the sanding disc to be

used.

• This MUST be the correct 10

hole 225mm diameter disc with

hook and loop backing.

3. Line up the holes in the disc with those on the sanding pad.

• This is necessary for dust extraction purposes.

4. Press the disc firmly onto the pad to secure it using the hook & loop

backing.

FITTING THE EXTENSION HANDLE & DUST BAG

1. Unfold handle and lock in place

with locking wheel (P10).

2. Loosen the locking wheel on the

underside of the handle.

3. Insert extension handle to

required length and tighten

locking wheel

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]