Aleko BSW04 Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Juegos infantiles y parques infantiles Aleko BSW04. Aleko BSW04 4 páginas. Swing and glider set for children aged 3 to 10 years

Imprimir página

BEFORE ASSEMBLING: Please read and abide by all Safety Guidelines, and confirm all

necessary parts are included by referencing parts list on page 1.

Step 1. Place together the short curved ends of the Left-Hand Top Leg and Right-Hand

Top Leg and insert as one into the Swing side (closest to the 2 sets of vertical holes) of the

Top Bar (Figure 1).

**Always Make sure to place included washers between fastener head or nut and

adjoining swing set components**

Step 2. Place 1 F1 bolt through the BOTTOM side of Top Bar and use included Allen Key

to hold bolt stationary while tightening nut using Spanner.

Repeat the process by inserting the remaining Top Legs into the Glider side (closest to 2

horizontal holes)

Step 3. Completely disassemble S1 U-Bolts then place u-shaped bolt through the hole

in the bearing assembly found at the end of the Swing Seat ropes (Fig. 2).

Step 4. Tighten open-ended S1 nut down onto u-shaped bolt, place 1 S1 washer on

each end of the bolt and insert into Top Bar through 2 sets of vertical holes on Swing

side. Ensure washer placement between nuts and Top Bar.

Step 5. Attach F1 closed-end nut to u-shaped bolt and tighten down. Repeat for both

sides of Swing Seat.

Figure 1

Fig. 2

Fig. 3