Clarke Woodworker CBS1-5B Manual de instrucciones de uso y mantenimiento - Página 9
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Sander Clarke Woodworker CBS1-5B. Clarke Woodworker CBS1-5B 16 páginas. Belt/disc sander
Imprimir página
BELT TRACKING
1. Remove the screws and clamping
knob indicated.
2. Remove the belt cover.
3. Turn the belt by hand and adjust
the tracking knob until the belt is
tracking correctly.
• Clockwise to track the belt to
the right.
• Anti-clockwise to track the belt
to the left,
NOTE: You only need to make very
small adjustments.
4. Replace cover screws and clamping knob.
5. Remove any tools from the sander and connect the sander to the power
supply.
6. Push the START (I) button and let
the sander reach full speed.
• Check that the belt is tracking
correctly, if not, press the stop
button and disconnect the
sander from the power supply.
Then go back to step 1 and try
again.
• If everything is ok the sander is
ready to use.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9