Clarke WOODWORKER CDS1 Instrucciones de uso y mantenimiento - Página 4

Navegue en línea o descargue pdf Instrucciones de uso y mantenimiento para Sander Clarke WOODWORKER CDS1. Clarke WOODWORKER CDS1 6 páginas. Detail sander

Imprimir página

SAFETY PRECAUTIONS

WARNING:

As with all machinery, there are certain hazards involved with their operation

and use. Exercising respect and caution will considerably lessen the risk of

personal injury. However, if normal safety precautions are overlooked or

ignored, personal injury to the operator or damage to property, may result.

1. ALWAYS Learn the machines' applications, limitations and the specific potential hazards

peculiar to it. Read and become familiar with the entire operating

manual.

2. ALWAYS use a face or dust mask if operation is particularly

dusty.

3. ALWAYS check for damage. Before using the machine, any damaged

part, should be checked to ensure that it will operate properly, and

perform its intended function.

Check for alignment of moving parts, breakage of parts, mountings, and any other

condition that may affect the machines' operation. Any damage should be properly

repaired or the part replaced. If in doubt, DO NOT use the machine. Consult your

local dealer.

4. ALWAYS disconnect the tool/machine from the power supply before servicing and when

changing accessories.

5. ALWAYS wear safety goggles, manufactured to the latest European Safety Standards.

Everyday eyeglasses do not have impact resistant lenses, they are not safety glasses.

6. ALWAYS keep work area clean. Cluttered areas and benches

invite accidents.

7. ALWAYS ensure that adequate lighting is available. A minimum

intensity of 300 lux should be provided. Ensure that lighting is

placed so that you will not be working in your own shadow.

8. ALWAYS keep children away. All visitors should be kept a safe distance from the work

area, especially whilst operating the machine.

9. ALWAYS maintain machine in top condition. Keep tools/machines

clean for the best and safest performance. Follow maintenance

instructions.

10. ALWAYS handle with extreme care do not carry the tool/machine

by its' electric cable, or yank the cable to disconnect it from the

power supply .

11. ALWAYS ensure the switch is off before plugging in to mains. Avoid accidental starting.

12. ALWAYS concentrate on the job in hand, no matter how

trivial it may seem. Be aware that accidents are caused

by carelessness due to familiarity.

13. ALWAYS keep your proper footing and balance at all times

don't overreach. For best footing, wear rubber soled

footwear. keep floor clear of oil, scrap wood, etc.

-3-

Parts Diagram

-8-