Clarke 7260065 Manual de instrucciones de uso y mantenimiento - Página 2
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Bomba de agua Clarke 7260065. Clarke 7260065 12 páginas.
Imprimir página
INTRODUCTION
•
Thank you for purchasing this CLARKE dirty water pump.
•
This pump is designed for pumping dirty water only, that is
solids in suspension. It is NOT designed for pumping slurry, sludge, mud or
heavily polluted water, or any water containing chemicals or other
acidic contaminants including salt water.
GUARANTEE
•
This product is guaranteed against faulty manufacture for a period of 12 months.
Please keep your receipt as proof of purchase.
•
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
•
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
•
This guarantee does not effect your statutory rights.
RECOMMENDED USES
The recommended uses for this pump are:
•
Drainage after flooding
•
The transfer of liquids
•
Drainage of containers
•
Taking water from wells and shafts
Liquids that CAN be pumped:
•
Dirty water - That is water containing solids in suspension,
•
Swimming pool water
Note: After pumping chlorinated water or other liquids containing
additives, the pump should be rinsed with clean water.
•
Soapy water
Liquids that MUST NOT be pumped are:
•
Corrosive substances including salt water
•
Combustible or explosive substances (petrol, thinners etc.)
•
Fats, oils or salts
•
Waste from toilets or urinals
•
Slurry, sludge, mud or heavily polluted water, or any water containing chemicals
Note: After pumping dirty water or other liquids the pump should be
rinsed with clean water
2
water containing