Directed Electronics Viper 550HF Manual del usuario - Página 19
Navegue en línea o descargue pdf Manual del usuario para Alarma de coche Directed Electronics Viper 550HF. Directed Electronics Viper 550HF 20 páginas.
Imprimir página
All manuals and user guides at all-guides.com
QUICK REFERENCE OPERATING CARD:
Arming
w
You can turn on, or arm, the system by pressing Button I of your
transmitter for one second. When the system arms, you will hear a
short chirp, and see the parking lights flash once.
Arming While Driving
w
Press Button I on your transmitter while the vehicle is running. The
system will chirp once and then once more to indicate that the igni-
tion is on.
Disarming
w
Press Button I. You will hear two chirps, and the parking lights will
flash twice.
High Security Disarm
w
Press Button I on your transmitter. The siren will stop sounding. Next
press Button I once more and the system will chirp four or five times
(reporting the trigger) and disarm.
Disarming Without a Transmitter
w
Turn on the ignition. Push the Valet switch within 15 seconds. The
system should now disarm. If it does not, you may have waited too
long, so turn the ignition off and on and try again.
Silent Mode
TM
w
Press Button II briefly before arming or disarming, and the confirma-
tion chirp(s) will be eliminated for that one operation only.
Panic Mode
w
Press Button I for 1.5 seconds, and you will enter Panic Mode. The
siren will sound and the parking lights will flash for 30 seconds. To
stop Panic Mode at any time, press Button I on the transmitter
again.
To enter or exit Valet
Mode with the Valet switch:
®
w
Turn ignition to "run" position, then turn to "off" position. Press and
release the Valet switch within 10 seconds. The Status LED will light
steady if you have entered Valet Mode, and go out when you exited.
Using Remote Valet as you enter or exit the vehicle:
w
Press Button I. Press Button II. Press Button I again. The Status
LED will light steady if you have entered Valet Mode,and go out if
when you exited.
19