Clarke HSEC651A Instrucciones de uso y mantenimiento - Página 10
Navegue en línea o descargue pdf Instrucciones de uso y mantenimiento para Bomba de agua Clarke HSEC651A. Clarke HSEC651A 20 páginas. Submersible pumps
También para Clarke HSEC651A: Manual de instrucciones de uso y mantenimiento (17 páginas)
Imprimir página
2. If the water is likely to freeze, the pump must be run continuously,
otherwise the pump must be removed from the water and stored in a frost
free location.
3. Never run the pump dry. Never run the pump with the body exposed for
more than 10 minutes.
4. When the water has been pumped out, disconnect from the power
supply. Avoid running the pump continuously.
AUTOMATIC THERMAL OVERLOAD
These pumps are fitted with automatic thermal overload protection. If the
pump overheats due to an obstruction in the pump, or pumping warm water
for example, it will shut off automatically. Switch the pump OFF and
disconnect from the mains supply. Check for blockages and allow the motor
to cool (at least 5 minutes) before attempting to restart, by which time the
cut-out will have reset.
ACCESSORIES
A wide range of accessories is available from your nearest CLARKE dealer, for
further information, contact your nearest dealer, or telephone CLARKE
International Sales department on 01992 565300.
PUMP PERFORMANCE
10