Directed Electronics Avital 3000 Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia Directed Electronics Avital 3000. Directed Electronics Avital 3000 18 páginas. Remote start keyless entry system
Imprimir página
To perform Valet Take-Over:
1.
Before turning off the engine, press and release
on the transmitter (or press and release the optional Mo-
mentary switch).
2.
Turn the ignition key to the OFF position.
(The engine will stay running.)
3.
The engine will run until the pre-programmed
time elapses or a shut-down input is
received. (See the previous Remote Start section for a com-
plete list of shut-down inputs.)
NOTE: This feature will not work if the brake pedal is being pressed.
Using Remote Start with Factory Remote Systems
This remote start system is also designed to interface with most
original equipment from manufacturer (OEM) factory remote
systems. The Remote Start/Valet Take-Over sequence can be pro-
grammed to initiate with one to three (1-3) presses of one of the
OEM transmitter buttons. Consult with your dealer to determine
the transmitter button and the number of presses (1-3) that have
been programmed for this sequence. Spaces are provided below for
writing in the button and number of button presses.
OEM transmitter button used for Remote Start/Valet Take-Over
sequence____________________________________________
Number of presses required to initiate Remote Start/Valet
Take-Over sequence___________________________________
12
and
2001 Directed Electronics, Inc.
©