Directed Electronics G4311A-AM15 AM15 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia Directed Electronics G4311A-AM15 AM15. Directed Electronics G4311A-AM15 AM15 6 páginas. Data start system for nissan with lcd 2way remote
Imprimir páginaRemote start the vehicle
To remote start the vehicle:
The doors and the hood must be closed.
Press one time on
Once the vehicle has started, the parking lights will stay ON while engine is running.
(3, 12 or 20 minutes, according to what was installed.)
To remote stop the vehicle
Press on
button 1 time and release, the vehicle will shut off. The parking liht will flash twice to confirm.
Note: It can be possible to ajust number of press on
adjustement must to be done at installation by dealer.) To use the remote started vehicle, you must have the OEM transceiver, if not,
the vehicle will stop as soon as you press the brake pedal.
Service Mode (or Valet Mode)
Service Mode allows you to temporarily de-activate remote starter functions. When the system is in service mode, the vehicle can
only be started with the vehicle's ignition key. In Service Mode the remote transceiver(s) will not activate the remote starter. Door
locks and trunk may still be activated using the remote transceiver(s).
To activate Service Mode with transceiver
Press and hold brake pedal.
Press 3 times on
The parking light will flash 2 times.
Release brake pedal.
Service mode is now activated.
To deactivate Service Mode with transceiver
Press and hold brake pedal.
Press 4 times on
The parking light will flash 2 times.
Release brake pedal.
Service mode is now deactivated
Door locks (Optionnal)
To lock all doors
Press on
button. The parking lights will flash once to confirm the doors are locked.
To unlock all doors
Press on
button. The parking lights will flash twice to confirm the doors are unlocked.
Trunk release (Optionnal)
To open the trunk, press on
lights will flash 3 times to confirm.
OTP - One Time Programmed Start
OTP allows the user to program the remote engine starter to start in a preset number of hours. OTP is a "one time" user
programmable start setting which can be preset up to 24 hours in advance.
To program
Press and release
Press
button and release to confirm.
The parking lights will flash the number of times that the
programmed to start.
Note: OTP must be activated each time it is to be used.
To cancel this function:
Press and release
Then, press this button
The parking lights will flash once to indicate the OTP mode is cancelled.
This mode is canceled as soon as either the remote engine starter or key is used to start the engine.
Note: To be use, the OTP mode must be enabled by dealer/installer at installation.
Cold Weather Start (Optionnal)
The cold weather start mode will start vehicle every 2 or 4 hours for a 24 hours period.
To activate
Press
button for 4 seconds.
The parking lights will flash to confirm the Cold Weather start mode is activated.
Once activated, the vehicle will start every 2 or 4 hours for a 24 hours period and run for a preset runtime. (for a maximum of
6 or 12 times).
This mode is canceled as soon as either the remote engine starter or key is used to start the engine.
Note: Cold Weather Start option must be enabled by dealer/installer. (2 or 4 hour option may be select.)
To cancel
Press and hold
button for 4 seconds. The parking light will flash once to confirm cancellation.
button and release.
button on the transceiver.
button on the transceiver.
button for 4 seconds and release. The system will activate trunk release (If installed.) The parking
button between 1 & 24 (Every press of the button = 1 hour.)
button 1 time.
and release.
button to start the vehicle. (Option: 1 time or 2 time can be selected. This
was pressed to confirm how many hours in advance system is
3
G4311A
2007-12