Clarke CCO14C Manual de instrucciones de uso y mantenimiento - Página 6
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Sierra Clarke CCO14C. Clarke CCO14C 17 páginas. Abrasive cut-off saw
Imprimir página
ELECTRICAL CONNECTIONS
WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS
THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS
SUPPLY.
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,
for connection to a standard, domestic electrical supply. Should the plug
need changing at any time, ensure that a plug of identical specification is
used.
WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE
COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
BLUE = NEUTRAL
If the colours of the wires in the power cable of this product do not correspond
with the markings on the terminals of your plug, proceed as follows.
• The wire which is
coloured Blue must be
connected to the
terminal which is
marked N or coloured
Black.
• The wire which is
coloured Brown must
be connected to the
terminal which is
marked L or coloured
Red.
• The YELLOW AND GREEN wire must be connected to the terminal
which is marked E or
We strongly recommend that this machine is connected to the mains supply
via a Residual Current Device (RCD)
If in any doubt, consult a qualified electrician. DO NOT attempt any repairs
yourself.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BROWN = LIVE
Plug must be BS1363/A approved.
Earth
(Green and
Yellow)
Neutral
(Blue)
Ensure that the outer sheath of
the cable is firmly held by the clamp
or coloured green.
6
YELLOW AND GREEN = EARTH
Always fit
a 13 Amp
fuse.
Live
(Brown)