Clarke DUO SAW Manual de instrucciones de uso y mantenimiento - Página 15

Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Sierra Clarke DUO SAW. Clarke DUO SAW 20 páginas. Multi purpose 5”(125mm) twin blade saw

Imprimir página

TROUBLESHOOTING

PROBLEM
Unusually large
amount of sparks.
A lot of wear in
sections.
Blades are breaking.
Possible causes of
broken teeth.
Duo Saw cuts out
during use.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CAUSE
Damaged teeth.
Feed speed is too slow.
Blunt teeth.
Feed speed is too fast.
Damaged teeth.
Blunt teeth.
Damaged teeth.
Feed speed is too fast.
Blunt teeth.
Blades have buckled.
Blades have burned
out.
Feed speed is too fast.
The Surface being cut is
too hard.
The teeth have been
damaged by impact.
Blade were not installed
correctly.
Blades are burned out.
Overload cut out has
tripped.
15
SOLUTION
Replace blades
Increase feed speed
Mount new set of cutter blades
Reduce the feed speed.
Replace blades
Replace blades.
Replace blades.
Reduce the feed speed.
Replace blades.
Replace blades.
Replace blades.
Replace blades.
Replace blades.
Replace blades.
Replace blades and follow the
proper blade installation
instructions.
Replace blades.
Stop work and remove the blade
from the workpiece, Reset the cut
out by pushing it back into the
saw.