Clarke DEVIL 371PC Instrucciones de uso y mantenimiento - Página 13
Navegue en línea o descargue pdf Instrucciones de uso y mantenimiento para Calentador Clarke DEVIL 371PC. Clarke DEVIL 371PC 17 páginas. Quartz halogen heater
Imprimir página
FAULT FINDING
SYMPTOM
Heater does not
operate, although
plugged in and
switched on.
Heater tube is glowing
hot.
Heater does not
respond to remote
controller.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PROBLEM
Plug is loose/bad
connection.
Fuse blown.
No power at socket
outlet
Tilt safety switch is
disabling unit
Input voltage incorrect. Ensure power supply
Air flow partly blocked. Ensure the heater is kept
Batteries defective.
Controller is out of
range or not pointing
at the display panel.
13
SOLUTION
Remove the plug & check
the connection of the plug
and socket.
Replace if necessary and
investigate the cause. If
fuse blow repeatedly,
consult your Clarke dealer.
Insert plug into a suitable
socket.
Ensure unit is upright. If
switch does not re-set,
consult your Clarke dealer.
matches the rating on the
label.
away from any objects or
materials which could
block the circulation of air.
Replace batteries.
Move closer or try different
angles of pointing the
controller at the heater.