Clarke CAT151 Instrucciones de uso y mantenimiento - Página 2
Navegue en línea o descargue pdf Instrucciones de uso y mantenimiento para Herramientas Clarke CAT151. Clarke CAT151 17 páginas. Air/hydraulic riveter
Imprimir página
INTRODUCTION
Thank you for purchasing this CLARKE Air Riveter. The CAT151 Air Riveter is
supplied with 4 nose pieces to accept 2.4 mm, 3.2 mm, 4.0 mm and 4.8 mm
rivets. The riveter has a hardened steel jaw assembly, a rivet stem safety cap,
and is suitable for both aluminium and steel rivets.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
OPERATING PRINCIPLE
The rivet is pushed through the hole in the workpiece and the rivet pin inserted
into the rivet gun nosepiece which will grip it tightly.
When the rivet gun is activated the throttle valve allows compressed air
through the tool. The pressure of the air forces the rivet pin into the jaws which
pull the pin up into the rivet. As the pin is taken up, the base of the rivet
expands and this joins the workpiece. The rivet gun pulls the pin until it breaks
off, thereby securing the rivet. The used pins are ejected into the safety cap
for disposal.
Pop rivets have limited strength so they are typically used for fastening light
sheet metals. Professionals sometimes refer to these rivets as blind rivets, as the
user cannot see the other side of the material being riveted.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2