Clarke CONTRACTOR 6462118 Manual de instrucciones de uso y mantenimiento - Página 3
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Herramientas Clarke CONTRACTOR 6462118. Clarke CONTRACTOR 6462118 20 páginas. Worktop jig
Imprimir página
Thank you for purchasing this CLARKE Worktop Jig.
Before attempting to use the jig, please read this manual thoroughly and follow the
instructions carefully. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to the jig giving you long and satisfactory service.
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not effect your statutory rights.
Specifications
Model Nos: ............................... CWJ700 & CWJ900
Part Nos: ................................... 6462118 & 6462119
Worktop Jig
For cutting left and right standard 90º and 45º joints.
For cutting connecting bolt recesses.
Cuts worktops ranging from 400mm to 900mm wide (model dependant).
Integral carry handle.
Snap in peg storage holder, includes 3 pegs.
Replacement pegs available from your Clarke dealer.
Tools required (not supplied) for use with the worktop jig
12mm (½") router capable of holding a 30mm guide bush.
30mm guide bush.
½" tungsten carbide router bit.
Minimum of two quick action woodworking clamps.
NOTE: worktop corners can be shaped using one of the four corners of the jig as a
template, there are three radii (10mm, 50mm & 100mm) the fourth corner is
45º. Example shown on page 17.
Tip: wherever possible, ALWAYS cut the joint before cutting wortop to length, this allows
for rectifiication in the event of minor mistakes when cutting the joint.
CLARKE GUARANTEE
Part No:WTJIG-01-PEGS-BK
-2-