Clarke KIT1100 Manual de instrucciones de uso y mantenimiento - Página 3

Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Herramientas Clarke KIT1100. Clarke KIT1100 17 páginas. Air tool kit

Clarke KIT1100 Manual de instrucciones de uso y mantenimiento

GENERAL SAFETY PRECAUTIONS

Before using your airline accessory kit it is in your own interest to read and pay
attention to the following safety rules.
1. Keep the work area clean and well lit. Cluttered areas invite injuries.
2. Keep children away. Children must never be allowed in the work area.
3. Store idle equipment. When not in use, tools should be locked up in a dry
location. Always lock up tools and keep out of reach of children.
4. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
5. Check for damaged parts. Before using any tool or equipment, any part
that appears damaged should be carefully checked to determine that it
will operate properly and perform its intended function.
6. Do not operate tools or equipment if under the influence of alcohol or
drugs. If there is any doubt, do not operate the equipment.
COMPRESSED AIR EQUIPMENT
1. Compressed air can be dangerous. Ensure that you are thoroughly familiar
with all precautions relating to the use of compressors and a compressed
air supply.
2. Never direct a jet of compressed air at people or animals.
3. Always ensure that the equipment/tool being used has a safe working
pressure exceeding the output pressure of the compressor that it is
connected to.
4. Always ensure that the air supply is turned off at the tool outlet and vent all
compressed air from the air hose and the equipment attached to it, before
disconnecting air hoses or other equipment from your compressor.
5. Ensure all fixed air connections are properly sealed using teflon tape or
pipe sealant.
6. Never exceed the operating pressure of the individual items stated in the
specification.
7. We strongly recommend that items contained in this kit be used in
conjunction with appropriate eye and face protecting goggles, glasses or
spray masks available from most DIY and hardware stores.
BLOW GUN
1. Always wear a suitable approved breathing mask, to protect against
inhalationof dust.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3