Clarke Metalworker CPTN1 Manual de instrucciones de uso y mantenimiento - Página 2
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Herramientas Clarke Metalworker CPTN1. Clarke Metalworker CPTN1 12 páginas. Pipe notcher
Imprimir página
INTRODUCTION
Thank you for purchasing this CLARKE Pipe Notcher.
This Pipe Notcher cuts notches in pipe and tubing to make joints that fit
together perfectly. It features a durable steel frame, is cable of 0 - 60
cuts and works with any standard drill press or slow speed hand drill.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
IMPORTANT
Please read all of the safety and operating instructions carefully before using
this product. Please pay particular attention to all sections of these instructions
that display warning symbols and notices.
WARNING: THIS SYMBOL IS USED THROUGHOUT THE INSTRUCTIONS
WHENEVER THERE IS A HAZARD OR RISK OF PERSONAL INJURY. ENSURE
THAT THESE WARNINGS ARE READ AND UNDERSTOOD AT ALL TIMES.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2
o
angle