Ctouch laser air Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para TV LCD Ctouch laser air. Ctouch laser air 2 páginas. Laser air

Imprimir página

Quick Start Guide

Smart innovation!

CTOUCH Laser air

Turning the CTOUCH interactive display on or off

Plug the power cord into an AC power outlet. Press Power Switch on the

CTOUCH interactive display

Now the

CTOUCH

is in standby mode. Wait a moment until the power indicator lights up, then press POWER

on the

CTOUCH interactive display

. (Be sure to wait for a few seconds before pressing POWER button. If you promptly

press POWER button then the

CTOUCH interactive display

may not respond or act wrongly.)

Press button again to turn off the

CTOUCH

and put the

display

in standby mode.

To cut off the power completely, press Power Switch on the

back of the CTOUCH

Note: If the

CTOUCH interactive display

does not receive a displaying signal for a certain time, the

standby mode.

Identification of Controls

:Switch the

CTOUCH interactive display

or standby.

: Press the button to display input source menu or

exit the menu screen.

: Press the button to return to previous menu.

: Press the button to display desktop (Home page)

on the screen.

: Press the button to open the setting menu.

Remote Sensor

: Press the button to volume down.

Power Indicator

: Press the button to volume up.

3.HDMI1/2/3 Input

To connect with those equipments with HDMI or DVI interface.

(A HDMI-to-DVI adapter cable is required when you are

connecting a DVI-equipped device to the

interactive display

USB

4.VGA OUT

Output the currently selected PC IN 1/2/3 signal.

HDMI 1

5.PC IN1/2/3

Enable connection to PC or other external devices with

HDMI 2

VGA/AUDIO ports.

6.TOUCH OUT

HDMI 3

Output the touch for external devices connected to PCx or

HDMIx port which support touch system.

VGA

7.AV IN

OUT

Input port for composite video.

AC IN

8.S/PDIF digital audio output

USB 3.0

Connect a digital sound system to this jack.

T6.3A 250V

Connect headphones to this jack. The

VGA 1

display

is the current audio output.

14 15

10.LAN OUT

AUDIO

The built-in router output port. Connection to another computer

AUDIO

or other Internet enabled devices.

VGA 2

11.WAN IN

The built-in router input port. Connect to the external network.

AUDIO

12.RS232

TOUCH

7 8 9 10 11 12

OUT

For service, software upgrades and the other uses.

13. AC IN

Plug the AC cord into this jack and into a power outlet.(~100-

240V 50Hz/60Hz)

: Wi-Fi antenna .

14. Fuse: T6.3A 250V

USB2.0/3.0

15. Power Switch

USB standard interface, enable connection to USB2.0, USB3.0

Push to ( ) to connect the power, push to ( O ) to cut off.

standard devices.

Note: Power switch can not be covered, and should keep the

power switch can be conveniently operated.

Connections

1. Connect the female plug to the AC socket on the unit.

2. Connect the male plug to the wall outlet as illustrated.

Notes:

AC IN

This product should be operated only from the type

of power source indicated on the marking label.

Always unplug the AC cord from power outlet when

not using for a long period of time.

to turn

AUDIO

Network cable

CTOUCH

goes into

Network cable

VGA cable

Audio cable

PC, etc.

power on

VGA devices

Digital sound system

AV devices

AV cable

Tighten the W-iFi antenna in clockwise direction. The Wi-Fi

Inside AP. When network cable is plugged in WAN port, the antenna will generate Wi-Fi network.

2.0

USB cable

USB

HDMI cable

HDMI 1

CTOUCH

HDMI cable

HDMI 2

HDMI cable

HDMI 3

VGA cable

VGA

OUT

USB cable

3.0

USB 3.0

USB devices

VGA cable

VGA 1

Audio cable

AUDIO

VGA cable

CTOUCH interactive

VGA 2

Audio cable

AUDIO

USB cable

TOUCH

OUT

Connect PC with VGA cable or HDMI cable.

Connect TOUCH OUT with USB cable to PC USB port.

installation of the driver, it can control the external computer by native touch control.

PC 1/2/3、HDMI 1/2/3 signal)

Please choose the proper method of connection based on your device.

Notes: 1.The

CTOUCH interactive display

is multiple USB port designed(3.0, 2.0), when connect with USB device, please

select the appropriate port.

2.The VGA output is signal of what has been currently selected from PC1/2/3.

Remote Control

Switch the CTOUCH interactive display

power on or Standby

Switch to AV mode

Switch to TV mode

Computer, etc.

Note: If no RF, this button has no function.

SLEEP

Serial port cable

Set up the sleep timer

Select aspect ratio

Network connection

Computer, etc.

Internet devices

0-9 number buttons

Headphone cable

Audio input devices

Before using headphones,

Display or exit input source menu

adjust the device volume so

as to avoid excessive levels, as

hearing damage may result.

Display or exit the setting menu screen

To confirm or enter a sub-menu or

toggle between options during MENU

operation.

Use Arrow buttons to navigate in on-

antenna is able to access Wi-Fi network.

screen menu.

HOME

Display desktop (Home page)on the screen

Select picture mode

USB devices

CHANNEL UP/DOWN

HDMI devices

Take screenshot and store the

data onto

your connected USB

storage device.

If USB storage device is not

Monitor

connected ,

take screenshot

and store the data onto

built-in

SDcard.

Folder's

Location:

Applications, then choose ES

File Explorer

or USB Drive.

Go to USB multi media player

PC, etc.

VGA devices

Go to DVD multi media player

Press to enter or exit the disc tray.

Note: If no DVD, this button has no function.

Computer

After

(Only for

Notes:

●

This operation manual provides a description based on operating functions with the remote control.

●

In different mode, some buttons may have different function.

Basic Operations

Touch the bottom of the

screen and drag upward

POWER

to make the MENU

appear.

Switch to VGA mode

VGA

HDMI

Switch to HDMI mode

ZO OM

S.M

INFO

Display or exit the current

program information

Switch to the

Select sound mode

Note: If no

internal PC module this icon is not displayed

the screen

Return to the previous channel

INPUT

Note: If no RF, this button has no function.

EXIT

Return to previous menu

or exit the on-screen menu

Home Page Overview

Displ ay the

internal PC module

on the screen

Note: If no

internal PC module

, this

Display system program

button has no function.

Shortcuts you created on Home page

Mute the sound

VOLUME UP/DOWN

P.M

MUTE

VOL

To freeze the current picture

SNAP FREEZE

Coloured

buttons(RED/GREEN/YELLOW/BLUE)

In all applications, use the red button to

USB

DVD

delete or add a shortcut.

Control buttons for USB Multi Media Player

: Play/Pause button

: STOP button

Switch to the

: Fast forward/fast reverse

Note: If no

: Previous/next

the screen.

Show all applications

RC-J55-0C

Touch the screen and drag to the left

direction to return to Home Page

Note: The layout of menu may vary upon different models you purchased.

A digital PDF manual to zoom in for better viewing can be found at: www.ctouch.eu.

Press and drag the MENU to any place of the

screen. Touch once to control the

surrounding MENU appear or disappear.

Touch once outside the MENU, the MENU

disappear.

When displaying at USB interface, touch

once at the lower part of the screen, the

display control menu will appear.

internal PC module

interface

Switch to the Home page (Android Interface)

Switch to the

display

menu screen

Switch to different input source, i.e.

HDMI, VGA, etc.

Go to your USB multi-media player.

Open the System Setup menu.

Exit Android and go to display mode.

Go to your web Browser.

internal PC module

interface

internal PC module

, VGA1 mode will be displayed on

Note: When using the app Camera, store the data onto your connected USB

device. If USB device is not connected ,

store the data onto

built-in SDcard.

Folder's Location: go to Applications, then choose ES File Explorer

USB Drive.