Clarus Fusion Series Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Sistemas de filtración de agua Clarus Fusion Series. Clarus Fusion Series 20 páginas. Treatment systems
También para Clarus Fusion Series: Manual del usuario (20 páginas)

Imprimir página

Sedimentation Chamber

This chamber is designed to physically separate solids from the

incoming water. Scum is the floating material and sludge is the

material that has settled at the bottom.

Anaerobic Filtration Chamber

This chamber contains a spherical skeleton-type filter media,

4.3 inch diameter (109 mm). Through bacterial growth

processes on the surface of the filter media, biological anaerobic

treatment thrives while suspended solids are captured.

Furthermore, the microorganisms in this chamber convert

nitrates in the recirculated water returning from the aerobic

contact filtration chamber to gaseous nitrogen. The gaseous

nitrogen then escapes to the atmosphere.

Figure 3 - Treatment Flow of the Fusion

The complete wastewater treatment system will typically consist of

the Fusion

treatment components and a soil absorption field for final

disposal of the liquid effluent. Some states or counties may require

the addition of a septic tank before the Fusion

sedimentation chamber capacity and retain more solids. Please see

Figure 10 for a typical Fusion

system. Variations to the typical system

will be made to suit your particular site and system design needs.

Please contact your authorized Fusion

provider for further information about your system design.

THE FUSION

SINGLE-PORT BLOWER

The Fusion

treatment unit comes with an electronic, single-port

blower. The blower utilizes a linear motor and two diaphragms to

generate the air flow necessary to aerate and recirculate water within

the system. This style of compressor is quieter and more efficient

than traditional rotary vane compressors.

PROCESS DESCRIPTION

System.

Influent



Sedimentation Chamber



Anaerobic Filtration Chamber



Aerobic Contact Filtration Chamber



Storage Chamber



Effluent

SYSTEM COMPONENTS

to increase the

installer or maintenance

Aerobic Contact Filtration Chamber

The upper section is filled with board contact media and the

lower section is filled with hollow, mesh, cylidrical filter media.

Water is adjusted and organic matters are decomposed by

aerobic micro-organisms /bacteria in the upper section as water

goes in. Biological aeration treatment and nitrification (convert

ammoniac nitrogens to nitrates) take place with the help of the

micro-organisms /bacterial growth on the filter media surface

while suspended solids are captured in the lower section.

Clean Water Storage Chamber

This chamber is designed to temporarily store treated water

exiting the aerobic contact filtration chamber. This treated water

is ready for discharge.

Recirculation

ALARM PANEL (sold separately)

The Fusion

alarm panel (See Figure 4) is designed to activate an

audible buzzer and red beacon light on top of the panel if there is a

drop in air pressure, or if a high water condition occurs. (Note: The

alarm panel can only function as long as there is electrical power

supplied to the panel.)

You may periodically check the proper operation of the alarm panel

by toggling the black switch on the side of the panel to "test". The

buzzer will sound and the red beacon will light as long as you hold

the switch in the "test" position. Release the switch for normal

operation.

Figure 4

FUSION

DATAPLATE

RED BEACON

WARNING!

SILENCE/TEST

SWITCH

P/N

BUZZER

SK2649