DirekTronik 25-0577 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Interruptor DirekTronik 25-0577. DirekTronik 25-0577 9 páginas. 4-port 4k hdmi kvm switch

Imprimir página

FAQ

Problems

Keyboard and mouse don't work at all no

matter which input port is switched to

Only after switch to some input port the

keyboard and mouse don't work

Mouse is slowed down/lag/delayed in

Windows 95/98/2000 system

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.

PRODUCT SERVICE

1) Damage requiring service: The unit should be serviced by qualified service personnel if:

(a)The DC power supply cord or AC adaptor has been damaged;

(b)Objects or liquids have gotten into the unit;

(c)The unit has been exposed to rain;

(d)The unit does not operate normally or exhibits a marked change in performance;

(e)The unit has been dropped or the cabinet damaged.

2) Servicing Personnel: Do not attempt to service the unit beyond that described in these

operating instructions. Refer all other servicing to authorized servicing personnel.

3) Replacement parts: When parts need replacing ensure the service uses parts specified by the

manufacturer or parts that have the same characteristics as the original parts. Unauthorized

substitutes may result in fire, electric shock, or other hazards.

4) Safety check: After repairs or service, ask the service to perform safety checks to confirm that

the unit is in proper working condition.

Solutions

Try below ways:

1. Unplug and plug the USB keyboard and mouse

2. Make sure the USB cable connections from KVM

switch to host devices are all correct

3. Reset the KVM switch by press RESET key

4. Unplug and plug the power cord of the KVM switch

then press RESET key

5. Make sure the precision of the mouse is less than

2000DPI

Make sure the USB cable connection from KVM

switch to host devices is correct and the USB cable

isn't broken

1. Go to device manager of the Windows, make sure

the KVM USB device is recognized by Windows, if

not, go to Windows control panel and add new

hardware manually

2. After KVM USB device is recognized by Windows,

install USB drivers in Windows device manager

Operating Instruction