CLAS OH 0249 Manual - Página 5

Navegue en línea o descargue pdf Manual para Sistemas de elevación CLAS OH 0249. CLAS OH 0249 8 páginas. 2 hooks swivelling engine support

OH 0249

2 HOOKS SWIVELLING ENGINE SUPPORT

USE

1. Read the owner's manual of the engine to be lifted to determine it's lifting points.

2. Do not try to move a running or hot engine. Allow suf cient time for the engine to cool down entirely before

beginning any operations.

3. Park the car on a at surface, apply the parking brakes and check the wheels.

4. Loosen Wing Screws (1) and spread Standing Bracket (3), and locate rubber cusions of the Standing Brackets

over the lips adjacent to the fenders of the car. Tighten the Wing Screws (1). Center the engine support bar

assembly over the engine.

5. Attach the Chains (8) to the engine at the appropriate lifting points, then loop the Chains securely to the ange

on the bottom of the Support Screws (7).

6. Turn the Handles (4) clockwise until the Chains are taut and the engine is held securely.

7. Loosen engine mounts. Turn the Handles (4) at 1/4" clockwise turns until the entire engine's weight is supported

by the chains. Additionally loosen/disconnect the engine mounts.

8. Do not work on the engine while it is supported only by the Engine Support. Moving the engine while it is

suspended only by the Engine Support can cause the Engine Support to fail or shift, resulting in serious personal

injury and/or property damage.

9. To prevent accidents, lower and reconnect the engine when nished working. The Engine Support is not

intended to be used as a long-term suspension device.

Clean, then store the tool indoors out of children's reach.

MAINTENANCE

1. BEFORE EACH USE, inspect the general condition of the tool.

Check for loose screws, misalignment or binding of moving parts, cracked or broken parts and any other condition

that may affect its safe operation.

2. AFTER USE, clean external surfaces of the tool with clean, moist cloth.