Acorn 5210A Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Cámara de exploración Acorn 5210A. Acorn 5210A 8 páginas.

Timelapse: this feature allows you to set you camera to record a video or capture an image every X

amount of hours, minutes or seconds regardless of whether or not there is any subject triggering the

camera at that moment in time. For instance you may want to record the changes on a construction

project and so take a new image every 12 hours to monitor progress over time.

If you do not want the camera to also trigger automatically using the sensors then you will

Side PIR: switch the side sensors on/off, recommended to leave these on as they allow the camera

to prepare in advance of a subject being central within the image.

Recycle: if set to ON the camera will start recording over the oldest recordings when the micro SD

card runs out of space. If set to OFF then the camera will stop recording any new images or video

Version: gives you information of the firmware version your camera is using.

Default Set: returns the camera back to factory default settings, this can be useful if you think your

You have two main options here, you can playback recorded files on the built in LCD screen

(explained below) or you can remove the SD card and insert into your home computer. If your

computer does not have an SD card slot then you can use a USB SD Card Reader to connect.

In TEST mode push the Replay/OK button to enter Playback mode.

Use the up & down arrow buttons to scroll through your recorded files. In the top left hand corner

of each file you will see a symbol denoting whether that file is an image or a video.

is an image, for a video a green video reel symbol that looks a bit like a # will show.

If you are looking at a video clip, push the right arrow (SHOT) button to play it.

Whilst in the Playback screen you can push the Menu button to bring up the option to delete files,

you can either choose to delete the current clip/photo or delete all of them.

Always use genuine branded SDHC (class 10 & 16G max) cards, there are often many fake cards

on the market (especially being sold on Amazon & eBay). Also, always format your SD card using

the "format" option in the camera menu, or format the card on your home computer.

SD cards do not last forever, if you think that yours may have developed a fault then try a new card

need to switch the Sense Level to OFF.

as soon as the card becomes full.

TV Mode: PAL or NTSC, UK mode is always PAL.

camera is not performing correctly. Acts as a reset tool.

PLAYBACK RECORDINGS:

Playback on built in LCD screen:

Press the OK button to leave Playback mode.

Deleting recordings when in the Playback Screen:

before assuming your camera is faulty.

SD Cards:

A white arrow