Lenovo ThinkStation P5 Manual - Página 27

Navegue en línea o descargue pdf Manual para Escritorio Lenovo ThinkStation P5. Lenovo ThinkStation P5 43 páginas. Storage configurator
También para Lenovo ThinkStation P5: Manual (8 páginas)

Imprimir página

Installing 3.5" SATA Drives in the Internal Bays

All ThinkStation P5 models include two internal SATA drive bays standard.

These bays are located in the bottom of the system between the PSU and

the front of the chassis. The side cover of the system must be removed to

access the internal drive bays. See

When adding SATA drives to a system with a 1000W PSU, where no SATA

drives were previously installed, it will be necessary to install a Front HDD

Bay Fan Kit. A system that shipped with a 750W PSU will have this fan kit

by default. The fan kit consists of a fan in a fan holder.

1. Pinch the arrowed tabs and pull the drive tray out of the system.

2. Insert the drive, bottom down into the tray with the signal and power

connections on the same end as the arrowed tabs. Angle the side of the

drive down into the tray and line up the holes on the side of the drive with

the posts on the inside of the tray then insert the posts.

Figure 1 in Section 1

for reference.