Lenovo System x3850 X6 Manual de inicio rápido - Página 24

Navegue en línea o descargue pdf Manual de inicio rápido para Servidor Lenovo System x3850 X6. Lenovo System x3850 X6 34 páginas. Ibm to lenovo upgrade
También para Lenovo System x3850 X6: Manual de instalación (50 páginas)

Imprimir página

Figure 24 Create Virtual Drive - Advanced

Figure 25 Select Drives

3. Select the drives.

4. Configure the type of RAID.

5. Configure the size of the array to create on the drives. (You can opt to not use the entire

size for the array if you want to create more than one logical partition on the drive.)

6. Set the default initialization type (use "Fast" for most purposes).

7. Save the configuration.

8. Select Yes to confirm the settings and create the array, as shown in Figure 26 on page 25.

The M5210 RAID card requires a driver to both install and function correctly in older Windows

(2008 and 2012) and Linux (RHEL 6.4, 6.5, SLES 1 and 1 SP1) operating systems. The driver

.inf files for Windows and RPM and DUD files are included on the x3850 X6 driver download

site.

If installing Windows 2012+, it is required to install the OS in UEFI mode. Failure to perform a

UEFI mode install results in the OS installer aborting prior to getting to the graphical portion of

the install. A UEFI mode install is required since the X6 includes the hardware for

implementing Secure Boot.

Requirements: A UEFI install requires the OS to be installed on a GPT disk and places an

entry in the Boot Order pointing back to the UEFI full path boot path of the .EFI loader.

Lenovo System x3850 X6 and x3950 X6 Quick Start Guide