Lenovo System x3950 X6 Manual de instalación - Página 26

Navegue en línea o descargue pdf Manual de instalación para Servidor Lenovo System x3950 X6. Lenovo System x3950 X6 50 páginas. Ibm to lenovo upgrade
También para Lenovo System x3950 X6: Manual de inicio rápido (34 páginas)

Imprimir página

o. Add a command line to the batch file for each Lenovo server component serial

p. Locate the IBM server component serial number prefixes in the <serial>_Node2_

System x3850 X6 and x3950 X6 IBM to Lenovo Upgrade Installation Guide

VPD.CompVPD_SerialNumber.# <s/n>

where:

• # is the component numeric identifier:

2 for the 8–socket midplane

3 for the front I/O panel assembly

4 for LCD display panel

Note: A serial number for the front I/O panel assembly (3) is not required and

might not be listed.

• <s/n> is a 6–character component serial number

Notes:

• The Lenovo server component serial numbers remain unchanged: they are the

same serial numbers that were used in the IBM server.

• The serial number is the last six characters of the 11S barcode. In the following

example, the serial number is shown in bold:

11S12X4567YJ1105A34567

number, following the form:

asu64 set VPD.CompVPD_SerialNumber.# <s/n> --host <IMM_IP> --user <IMM_

userid> --password <IMM_password>

where:

• # is the component numeric identifier:

2 for the 8–socket midplane

3 for the front I/O panel assembly

4 for LCD display panel

Note: A serial number for the front I/O panel assembly (3) is not required.

• <s/n> is a 6–character component serial number (the Lenovo server and the

IBM server use the same component serial numbers)

• <IMM_IP> is the IMM IP address

• <IMM_userid> is the IMM user name

• <IMM_password> is the IMM password

component.txt file. There are multiple component serial number prefixes in the

following format:

VPD.CompVPD_PrefixSerialNumber.# <prefix_s/n>

where:

• # is the component numeric identifier:

2 for the 8–socket midplane

3 for the front I/O panel assembly

4 for LCD display panel

Note: A serial number for the front I/O panel assembly (3) is not required and

might not be listed.