CTS EPS-3112 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Interruptor CTS EPS-3112. CTS EPS-3112 19 páginas. Management layer 2 gigabit poe ethernet switch 8 poe ports 10/100/1000mbps rj-45 + 4 combo uplink ports (10/100/1000 mbps rj-45 and 100/1000mbps sfp slot)

CTS EPS-3112 Manual del usuario

1.5 Network Management

This Managed Switch is Plug & Play compliant. Real-time operational status
can be monitored through a set of LED indicators located in the front panel.
Built-in management module also allows users to configure, control and monitor
the system remotely.
Following is a list of management options available in this Managed Switch:
Local Console Management
Telnet Management
SNMP Management
Web Management
Local Console Management
Users may connect a Terminal or PC with Terminal Emulation program, to the
anaged witch
control and monitor the system. This is often referred as Out-Of-Band
management.
Console management is useful when there is no network connection to the
Switch, for instance configuring the Managed Switch for the first time.
Telnet Management
Telnet is done through the network. Once there is a network connection to the
Managed Switch, users can use Telnet to configure, control and monitor the
system. Using network connection to manage is often referred to In-Band-
Management.
SNMP Management
SNMP is also In-Band-Management and requires a network connection to the
Managed Switch. The Managed Switch private Management Information Bases
(MIB) is provided for SNMP-based network management program to configure,
control and monitor the system.
Web Management
Web Management is done over the network. Once the Managed Switch is
available on the network, you can login and monitor the status of it through a
web browser remotely or locally. Local console-type Web management,
especially for the first time use of the Managed Switch to set up the needed IP,
can also be done through one of the 10/100/1000Base-T 8-pin RJ-45 ports
located on the front panel of the Managed Switch. Direct RJ-45 LAN cable
connection between a PC and the Managed Switch is required for this
management.
(30km/50km)
SFP Transceiver for 1000BASE-ZX Single-mode fiber module (80km)
ort directly ia a
-
-to-
10
a le to configure,