3Com OfficeConnect 3CR100A97 Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Pasarela 3Com OfficeConnect 3CR100A97. 3Com OfficeConnect 3CR100A97 17 páginas. Adsl data

Imprimir página

Conﬁgure

the Gateway

Figure 3

Figure 4

Figure 5

Figure 6

The following procedure describes how to initially conﬁgure the

Wide Area Network (WAN) interface settings for your

OfﬁceConnect Gateway or re-conﬁgure them after resetting the

unit to its factory default settings.

Using a web browser on your PC, launch the OfﬁceConnect

Gateway home page by entering the OfﬁceConnect Gateway's

If the WAN Interface Inactive message is displayed (Fig 4), your

ﬁrst step is to create a password protected admin account and

The default value for the User Name is admin. There is no

default Password value. Enter admin in the User Name ﬁeld and

leave the Password ﬁeld blank (no entry). Click OK.

The system will display the Unprotected User window (Fig 6). You

need to assign a Password for your User Name (admin). This

window is displayed when the OfﬁceConnect Gateway Web

Click Apply and the WAN Interface Conﬁguration screen will

appear. Continue on to the WAN Conﬁguration section on page 6.

default IP address, 192.168.1.1.

If after the initial connection the

OfﬁceConnect Gateway home

page (Fig 3) is displayed, then

the WAN interface has already

been conﬁgured for you.

Congratulations, your

OfﬁceConnect Gateway is

successfully conﬁgured and

ready for use.

conﬁgure the WAN interface.

Click Continue to proceed.

The system will display the

Username and Password Required

window (Fig 5) and prompts for

Username and Password. (Note:

The User Name and Password

entries are case-sensitive.)

Conﬁgurator is accessed using

the system's default password;

such as during the initial conﬁg-

uration of the unit or after the

factory default settings have

been restored.