Lenovo 61FE-MAR6-WW Manual del usuario - Página 26
Navegue en línea o descargue pdf Manual del usuario para Monitor Lenovo 61FE-MAR6-WW. Lenovo 61FE-MAR6-WW 34 páginas.
Imprimir página
Manual image setup
If automatic image setup does not establish the image that you prefer, perform
manual image setup.
Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft
Windows 10.
Installing the monitor driver in Windows 7
To install the device driver in Microsoft® Windows 7, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
4. From the Lenovo website https://pcsupport.lenovo.com/solutions/t22i_20, find the
5. Open the Display Properties window by right-clicking Start, Control Panel, Hardware and
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Have Disk button. By clicking the Browse button, browse and point to the following
14. Select the "T22i-20.inf" file and click the Open button. Click the OK button.
1.Press
at the bottom of the monitor to open the OSD menu.
2.Use
or
to select
3.Use
or
to select Image Setup and press
4.Use
or
to select Clock and Phase adjustment.
● Clock (pixel frequency) adjusts the number of pixels scanned by one Horizontal
sweep. If the frequency is not correct, the screen shows vertical Stripes and the
picture does not have the correct width.
● Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment,
the picture has horizontal disturbances in light picture.
4.When the image no longer looks distorted, save the Clock and Phase adjustments.
5.Press
to leave the OSD menu.
Windows 7 operating system.
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop).
Sound icon, and then click the Display icon.
path:
X:\Monitor Drivers\Windows 7
(Where X indicates "the folder in which the downloaded driver is located" (such as a desktop)
and press
to access.
to access.
Reference information 3-5