Lenovo C2 Series Manual de sustitución de hardware - Página 17

Navegue en línea o descargue pdf Manual de sustitución de hardware para Teléfono móvil Lenovo C2 Series. Lenovo C2 Series 25 páginas. Machine type: 10075/3078, 10076/3079, 10077/3094, 10078/3095
También para Lenovo C2 Series: Manual del usuario (37 páginas), Manual del usuario (35 páginas), Manual del usuario (41 páginas), Manual del usuario (29 páginas), Manual del usuario (45 páginas), Manual del usuario (47 páginas), Manual del usuario (43 páginas), Manual de inicio rápido (20 páginas), Manual del usuario (45 páginas), Manual del usuario (19 páginas)

Replacing the optical drive

Attention:

Turn off the computer and wait 3 to 5 minutes to let it cool down before

replacing the optical drive.

To remove the optical drive:

Note: It may be helpful to place the computer face-down on a soft flat surface

for this procedure. Lenovo recommends that you use a blanket, towel, or

other soft cloth to protect the screen from scratches or other damage.

1. Remove any media (disks, CDs, or memory cards) from the drives, shut down

the operating system, and turn off the computer and all attached devices.

2. Unplug all power cords from electrical outlets.

3. Disconnect all cables attached to the computer. This includes power cords,

input/output (I/O) cables, and any other cables that are connected to the

computer. Refer to "Left and right views" and "Rear view" for help with locating

the various connectors.

4. Remove the rubber cap that protects the screw.

5. Remove the screw that secures the optical drive to the chassis.

6. Push the optical drive so that it slides out of the drive bay.

Hardware Replacement Guide