Lenovo RackSwitch G8272 Manual de inicio rápido - Página 20
Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Lenovo RackSwitch G8272. Lenovo RackSwitch G8272 24 páginas.
También para Lenovo RackSwitch G8272: Manual del producto (32 páginas), Manual de inicio rápido (7 páginas)
Imprimir página
Booting in ONIE Uninstall Mode
20
Lenovo ONIE Quick Start Guide for G8272
Lenovo Cloud Network OS:
G8272(config)# display boot
Current FLASH software:
active image: version 10.1.1.0
standby image: version 10.1.1.0
Uboot: version 10.1.1.0
ONIE: version 10.1.1.0
Currently set to boot ONIE install mode
Currently scheduled reboot time: none
Current port mode: default mode
This mode is used to uninstall a NOS using ONIE. The ONIE uninstall mode boots
the ONIE kernel and deletes the NOS image running on the switch. After the
uninstall is complete, the ONIE discovery process is executed.
To boot the switch in ONIE uninstall mode on the next reload, use the following
command from the switch CLI:
Lenovo Enterprise Network OS:
G8272(config)# boot image onie-image uninstall
Lenovo Cloud Network OS:
G8272(config)# startup image onie-image uninstall
Note: The following warning will be displayed after choosing ONIE uninstall
mode and you will be prompted for confirmation:
WARNING: Booting ONIE in uninstall mode will completely uninstall the
operating system!
Only the ONIE image will be preserved.
Are you sure you want the next boot to uninstall the OS? (y/n)
Once you confirm, the switch will boot in ONIE uninstall mode on the next reload.
For more details, see
"Uninstalling the Lenovo Network OS" on page
27.