CTS CVT-RACK-16S Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Chasis CTS CVT-RACK-16S. CTS CVT-RACK-16S 2 páginas. 16-slot universal media converter chassis

Imprimir página

INSTALLATION AUXILIARY FIGURES

Accessories

Power cord x 1

Pulling cable x 1

Mount ear x 2

Slider set x 16

Rubber pedestal x 4

Upper and lower slider of

media converter

When installing the media converter to the Chassis,

please attach two sliders to the media converter

first.

1. Take off 4 screws from the media converter.

2. Fasten two sliders with screws in top and

bottom locations.

Note:

1. For recent media converters, there are 4 reserved screw holes on

laterals or sliders.

2. If your media converters are older versions, please unscrew first

(Refer to Point 1).

3. If your media converters already have reserved lateral holes,

please fasten the sliders directly (Refer to Point 2).

Top view with fan location

Unfasten four screws for fan replacement.

Mount ear

Take screws off to remove mount ear

Slide in

Push media converter into the Chassis and

fasten screws on the slider of media converter.

Fan replacement

1.Taking the fan out from CVT-RACK-16S, then

pull power jacket off.

2.Replace a new fan, then put power jacket back.

3.Push the new fan back to CVT-RACK-16S.

4.Fasten four screws.

Mount rack

Fasten screws in rack to fix CVT-RACK-16S

Slide out with pulling

cable

Pull out the media converter with the pulling

cable.