Nikon TIRF Manual de instrucciones - Página 24

Navegue en línea o descargue pdf Manual de instrucciones para Cámara digital Nikon TIRF. Nikon TIRF 37 páginas. System for te2000

Getting started (Emitting the laser)

Emitting the argon laser

1 Switch on the power switch and turn the key

switch clockwise on the argon laser power

unit to turn on the unit.

2 Turn the key switch clockwise on the argon

laser remote controller to turn on the

controller.

At this time, make sure that Run mode is

selected. Three lamps on the remote

controller will light green in approximately

one minute. Laser output will stabilize in

approximately 15 minutes.

• Be sure to read the Instruction Manual supplied

with the air-cooled argon laser.

• Always select Run mode when using the argon

laser. Image quality may be degraded if Run

mode is not selected.

Operations

Getting started (Emitting the laser)

- 22 -

(1) Switch on the power switch

(2) Turn the key switch clockwise

Argon laser power unit

(2) Run mode is selected

(1) Turn the key switch clockwise

Argon laser remote controller