Nikon D200 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios para cámaras Nikon D200. Nikon D200 23 páginas. Exploring
También para Nikon D200: Folleto y especificaciones (13 páginas), Folleto (7 páginas), Manual de instalación (2 páginas), Folleto y especificaciones (18 páginas), Folleto (14 páginas), Especificaciones (2 páginas), Características y cuadro comparativo (1 páginas), Manual del usuario (19 páginas), Especificaciones (2 páginas), Manual de inicio rápido (2 páginas), Manual (25 páginas), Manual de inicio rápido (9 páginas)

Look through viewfinder with lens cover on and shutter button depressed half way,

Illuminated fields should show left to right:

A solid circle inside of a rectangular box [spot metering]

Low f3.5 P

ISO 500 [898] [ISO set to 500 and 898 photos remaining]

Remove lens cover and point camera at a bright outside scene – depress shutter button

half way – look into viewfinder

There should be a bold outlined box with a circle in the center at the center

of the view [auto focus set to matrix metering at center of scene]

The left portion of the line of text will show shutter speed and f stop

While holding shutter button half down, rotate the Main Command Dial

with your thumb [located upper right of camera back]

Important – you will have to set the shutter speed to 1000 for each photo

you shoot (or fastest speed less than 1000 that can be set) using the above

procedure!

Confirm Camera Setup by doing the following:

Press Menu button

Select Recent Settings (using cursor)

If settings do not agree, then go into the Setup Page and adjust as required.

[For example 250 f8]

Until shutter speed gets to 1000 or largest value less than 1000

[f -stop will get smaller for larger speed numbers]

Image size to Large [L]

Image Quality to FINE [JPEG Fine].

than Fine, use the cursor to select and set it to Fine

ISO Sensitivity 500 [you set it to 500 a few steps ago!]

Spot Metering Selector

Focus Selector Lock

AF Area Mode Selector

If it is set to Normal or other