Nikon DS-5MC Manual de instrucciones - Página 19

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios para cámaras Nikon DS-5MC. Nikon DS-5MC 49 páginas. Ds camera control unit, ds camera head, ds cooled camera head
También para Nikon DS-5MC: Manual de instrucciones (47 páginas), Referencia rápida (15 páginas)

Imprimir página

Trigger input

Exposure

Read-out transfer timing

Signal output

There is a time lag of up to 0.7 ms between reception of the trigger signal and exposure.

Once a trigger signal is received, the next signal is not accepted until the image has been

transferred via USB. Even if a signal is received during this time, it has no effect. Triggers can be

received again after the falling edge of the read-out transfer timing signal output.

For detailed instructions on triggered capture, refer to the software instruction manual.

(5) Connecting to a Power Supply

Be sure to turn off the DS-U2 before connecting the DS camera head to prevent electric shock.

Complete all other connections before connecting to a power supply.

Be sure to use the specified AC adapter (DS AC adapter). Refer to "3. DS AC adapter" in Chapter 9,

Specifications for details. Connect the specified power cord to the specified AC adapter. Using a

wrong AC adapter or power cord may result in a fire or other dangerous conditions. This product is

classified as Class I protection against electric shock. Make sure that the power supply is

connected to a wall outlet with a protective ground terminal. When the power cord is lost or

damaged, contact your nearest Nikon representative.

Chapter 4

Connecting and Installing the Equipment

Connection Methods

1 ms or more

0.7 ms or less

Approx. 0.5 sec.

Trigger input not possible

- 13 -

Trigger input

possible