Nikon SMZ445 Manual de instrucciones - Página 16

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Nikon SMZ445. Nikon SMZ445 18 páginas. Stereoscopic microscope

Operating Procedure

1. Place the specimen on the stage plate.

2. Turn both diopter rings on the binocular tubes until the end surface

3. Looking into the eyepieces, adjust the interpupillary distance by

4. Set the zooming knob to its highest magnification.

5. Rotating the focus knobs, bring the specimen image into focus. If,

6. Rotate the zooming knob to its lowest magnification.

7. Rotate the right- and lefthand diopter rings one after the other to

8. Repeat the above processes from 4. to 7. to make sure of exact

Models SMZ460, SMZ445 and

C-PSC Focusing stand are

made antistatic. They are very

useful in observing specimens

weak against static.

The M4 ground tap (depth:

6 mm) is at the rear of the

zooming body. The φ 4 mm

ground jack is at the rear of the

focusing stand. Ground the

microscope using them as

required.

of each ring coincides with the black engraved line.

moving the binocular tubes, so that both the circular viewfields are

brought into coincidence.

beforehand, the distance between the specimen and the bottom of

the microscope main body is made about 100 mm, focusing will be

facilitated.

bring the images into focus independently.

focusing, and, then the image will keep its sharpness all the time of

continuous magnification change by zooming.

Tapped screw hole

for grounding