Nikon ARROW ID 7000 VR Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Nikon ARROW ID 7000 VR. Nikon ARROW ID 7000 VR 23 páginas.

Nikon ARROW ID 7000 VR Manual de instrucciones
[Functions]

■ VR (Vibration Reduction) function

En
Fr
ON and OFF
The VR (Vibration Reduction) function is activated concurrently when the Laser
Rangefinder is ON.
When the Laser Rangefinder is OFF, the VR (Vibration Reduction) function
automatically turns off.
■ Target priority mode (First Target Priority mode/Distant Target Priority mode)
This Nikon Laser Rangefinder employs the First Target Priority/Distant Target Priority switching system.
(Factory default setting is First Target Priority mode.)
When measuring overlapping subjects:
First Target Priority mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest subject.
10

[First step]

■ Inserting/Replacing battery
1. Type of battery
3V CR2 lithium battery x1

2. Inserting/Replacing battery

2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber.
The [+] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the
Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new
one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber
packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely
closed.
3. Battery level indicator
* The battery condition mark in the internal display warns when the battery needs to be replaced.
Display
After power on, displays for 2 seconds only.
After power on, displays for 2 seconds only.
Displayed continuously.
Blinks. After blinking 3 times, automatically
powers off.
Description
Sufficient power available.
Power getting low.
Prepare to replace the battery.
Low. Battery should be replaced with a new one.
Power exhausted.
Replace the battery.
11
En
Fr