Nikon SB-10 Manual de instrucciones - Página 16
Navegue en línea o descargue pdf Manual de instrucciones para Flash de la cámara Nikon SB-10. Nikon SB-10 24 páginas.
Imprimir página
TAKING AN AUTO FLASH PHOTOGRAPH
To
act ivate
the
unit,
slide the
powe
r
switch
to
the ON
position.
While the
capacitor
is charging,
you will
hear
a soft whining sound which
de-
creases in
volume
as the speedlight
unit becomes
fully charged.
The
ready-light
indicates
that
the
unit is
ready to fire. Select the appropriate
f/number on
the
speedlight.
Next,
set the
camera
lens
at the same
f/number,
compose,
focus and
press
the shutter-release
button
on
the
camera.
The
speed
light
automatically
determines the
correct flash
intensity
as
long
as
the subject
remains
within the shooting
range
of the f/number indicated on the speed
light.
Note: Be
sur
e
to
slid
e
the power switch to the OFF
position when you are
not
using
the
flash
unit
.
16
Ready-Light/Open Flash Button
The ready-light
doubles as the open flash
button. To activate,
push
down on the trans-
parent
ready-light.
The open flash
is
used for
test-firing.
It
is
a
lso used
for firing with the
shutter held open
at
the
B
setting
for strobe
effects, etc.
Caution:
(1)
To create "stroboscopic" effects,
in
which the
flash
is
fired independently with
th
e
shutter
held
open at
"B,"
the 5B-10 must be
disconnected
from the FE. Otherwise, the open-flash
button
will
not
work, and the flash
uni
t
cannot
be
fired.
(2)
Remember that even
before
comp
letion
of charg-
ing, the
ready-light
glows.
If
the
speed light
fires
immediately after
the lamp
lights
up,
pictures