ArmorAll AA255W Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Aspiradora ArmorAll AA255W. ArmorAll AA255W 12 páginas.

GENERAL ASSEMBLY INSTRUCTIONS

WARNING:

DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS

DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC

UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY

1. Verify that the power cord is disconnected from the outlet. (fig.1)

2. Undo the latches. (fig.2)

3. Lift the power head off the container. (fig.3)

4. Remove the contents from inside the container, make sure you have all contents as listed on page 5.

(fig.4)

5. For dry vacuum cleaning, install the supplied reusable cloth filter. (fig.5) See page 10 for filter installation.

6. For wet vacuum cleaning, install the supplied foam filter. (fig.6) See page 10 for filter installation.

7. Turn the container upside down and fit the base assembly onto the tank. Secure the base to the tank

with the supplied screws. Verify that the base is assembled correctly. Do not over-tighten screw. (fig. 7)

8. Place the power head back on the container, aligning the top section with the latches, and snap into

place. (fig. 8 & 9)

9. Insert the larger end of the hose into the desired port. (fig.10)

10. Choose the desired accessories and insert onto the end of the hose. (fig.11)

POLARIZED PLUG

To reduce the risk of electrical shock, this appliance has a double polarized plug (one with the blade wider

than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not

change the plug in any way. Double insulation

cord and grounded power supply system.

eliminates the need for the three wire grounded power