Dirt Devil Upright vacuum cleaner Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Aspiradora Dirt Devil Upright vacuum cleaner. Dirt Devil Upright vacuum cleaner 20 páginas. Upright vacuum cleaner
Imprimir página
BELT & BRUSHROLL REMOVAL & REPLACEMENT: CONTINUED
3.
With new belt in place,
pull and slide brushroll
into nozzle making sure
that the brushroll end
caps are in the correct
orientation (3a inset).
Rotate brushroll manually
to make sure belt is
3a.
properly aligned.
5.
To reattach nozzle
guard, rotate/pivot
back into position.
LIGHTBULB: REMOVAL & REPLACEMENT
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK - UNPLUG CLEANER BEFORE REMOVING OR REPLACING
LIGHTBULB.
NOTE:This cleaner uses a common automotive lamp #906, 13.0 volts. For bulb replacement, call 1-800-321-1134
or your local auto parts store.
1a.
1.
Lean cleaner handle back. Remove the one (1)
screw (Diagram 1). Lift lens cover to remove
(Diagram 1a).
4.
Secure by aligning
the four (4) tabs in
the base slots.
SLOTS
TABS
6.
Replace all three
(3) screws to
secure
guard.
2.
3.
TAB
Pull bulb out of socket.
Slide tab on lens into slot on
Do NOT twist. Gently
housing. Rotate/pivot lens
push bulb into socket
back into place (Diagram 3).
to replace.
Secure the headlight lens by
replacing the one screw
(Diagram 3a).
11
nozzle
SLOT
3a.