EMPTYING & CLEANING THE DIRTY WATER TANK & FILTER:
CONTINUED
4.
To empty Dirty Water
Tank, grasp handle
with one hand and
nozzle with the other
and empty into sink.
To clean, rinse tank
thoroughly with clean
water and let dry.
REPLACING DIRTY WATER TANK IN BASE OF CLEANER
6.
1.
Rinse Dirty Water Tank and
While making sure the front
Filter with warm tap water.
of the Dirty Water Tank is
Wipe and let dry thoroughly
resting on the base, place
before storing to prevent
the rear of the tank into the
mildew from forming. NOTE:
base of the cleaner.
Do not use any chemicals
when cleaning.
TRANSPORTING & STORING SHAMPOOER
TRANSPORT
1.
.
1a
Diagram 1: Put handle in upright
locked position. Turn unit off. Store
cord and above floor cleaning
attachments if used. (See cord
and Tool Storage Pg. 7) Diagram
1a: Tilt unit back on rear wheels and push
forward. NOTE: The unit can also be transported
between rooms or floors using the carry handle.
(See Features section Pg. 5)
WARNING: DO NOT STORE THE CARPET SHAMPOOER IN GARAGE OR
AREA WHERE UNIT COULD FREEZE.
DO NOT TRANSPORT THE SHAMPOOER WITH EITHER THE CLEAN WATER
TANK OR DIRTY WATER TANK FULL.
5.
Remove filter from bottom
of Dirty Water Tank Lid.
2.
Push handle down until it latches. NOTE: Do
not store cleaner with solution in reservoir
or dirty water in dirty water tank. Mineral
deposits and mildew can form which will
affect the performance of your Carpet
Shampooer.
STORAGE
BEFORE STORING SHAMOOER:
1.
Empty and rinse Clean Water Tank
and Dirty Water Tank.
2.
Replace empty Clean Water Tank and
Dirty Water Tank.
3.
Ensure that brushes and underside of
unit are fully dry prior to storing on a
carpeted or wood surface.
NOTE: Do not store unit with a full Clean
Water Tank or Dirty Water Tank.
11