Dirt Devil TWIN MOTOR 1099e Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Sistemas de aspiración centralizada Dirt Devil TWIN MOTOR 1099e. Dirt Devil TWIN MOTOR 1099e 8 páginas. Central vacuum
También para Dirt Devil TWIN MOTOR 1099e: Manual de instrucciones (16 páginas)

Imprimir página

Dirt Devil

Filtered Cyclonic Twin Motor

MODEL: 1099e

ILLUS. #1

Follow these steps to empty the

dirt canister (refer to Illustration #1)

Make sure the Power Unit is OFF.

1) Disengage the canister latches

located on opposite sides of the

power unit.

2) Remove the dirt canister.

3) Dispose of canister contents in

trash receptacle.

4) Raise the empty dirt canister to the

proper location under the power

unit and engage the latches.

5) Be certain the dirt canister and

the cyclonic cone seal are

"seated" properly to the body of

the unit.

Follow these steps to replace the

filter cartridge (refer to Illustration #2)

Make sure the Power Unit is OFF.

1) Unlatch and remove the Dirt

Canister.

2) Remove the cyclonic cone by

pulling down on it. Place cone

in dirt canister.

3) Remove the pleated filter by

turning the filter latch 90° (counter-

clockwise) to disengage the filter.

(The filter latch is located at the

bottom of the pleated filter)

4) Insert new pleated filter (p/n

8107-01) and engage filter latch

(by rotating it 90° clockwise until

you feel it snap in place).

5) Raise the dirt canister (with cone

inside) to the proper location

under the power unit and engage

the latches.

6) Be certain the dirt canister and

cyclonic cone seal are "seated"

properly to the body of the unit.

Filter

Cartridge

Cyclonic

Cone Seal

Filter Latch

Cyclonic Cone

(turn 90° to

disengage filter)

Dirt Canister

ILLUS. #2